GE IC693PWR330
Technical Specifications: Output Power: 5 VDC: Maximum 30 Watts 24 VDC Relay: Maximum 5 Watts Isolated 24 VDC: Maximum 20 Watts Total Maximum: 30 Watts (across all three outputs)
GE
You are here:
GE IC693MDL740
Technical Specifications Model: IC693MDL740 Series: 90-30 Series Type: Digital Input/Output Module (Primarily Output Module) Output Type: Positive Logic DC Output Number of Outputs: 16 (divided into 2 groups of 8)
GE IC693CPU374
Technical Specifications Manufacturer: General Electric (GE) Series: GE Fanuc Series 90-30 Product Type: Single-slot CPU Module with Embedded Ethernet Interface Processor Type: Embedded 586 Processor Speed: 133 MHz
GE IC693CHS398
Technical Specifications Model: IC693CHS398 Manufacturer: GE Fanuc (now often referred to as GE Automation & Controls) Series: 90-30 Series Dimensions: 10.43 x 5.12 x 5.59 inches (Width x Height x Depth) Power Requirements: 5VDC, Internal Power Consumption: 170 mA @ 5VDC I/O Slots: 5 slots for installing I/O modules Connector Type: 25-pin D-sub female I/O expansion connector on the rightmost edge Cable Distance: Maximum allowed cable length for interconnection is 50 feet (15 meters) Compatibility: Compatible with CPU 331, 340, 341, 350, or higher versions
GE IC693CHS397
Technical Specifications Manufacturer: GE (General Electric) Model: IC693CHS397 Type: 5-slot expansion baseplate for 90-30 series PLC platform I/O Slots: Supports multiple I/O modules and expansion ports Compatibility: Designed to work with CPU baseplates and connect via expansion ports Power Requirements: Depends on the connected CPU and modules
GE IC693CHS391
Technical Specifications Model: IC693CHS391 Manufacturer: GE Fanuc Series: Part of the 90-30 Series PLC (Programmable Logic Controller) Slots: Total Slots: 10 CPU Slot: 1 I/O Slots: 9 Power Slot (excluded from slot count): 1 (located on the leftmost side) Voltage and Current: Rated Voltage: 5 VDC Rated Current: 420 mA
GE IC693ALG222
Technical Specifications Model: IC693ALG222 Manufacturer: GE (General Electric) Country of Origin: United States Voltage: 220V Processing Speed: 50 microseconds (μs) Memory: 32KB user memory I/O Points: Small, with 4K I/O capacity Rack Support: Up to 8 racks Logic Execution Time: 0.22msec/K Power Consumption: Low power consumption, with specific values for +5VDC and +24VDC buses Compatibility: Compatible with Ethernet, various bus modules, and advanced control modules
GE IC693ACC302A
Technical Specifications Brand: GE Model: IC693ACC302A Compatibility: Part of the GE Fanuc automation portfolio, designed for use in various automation systems Communication Protocols: Supports Modbus Master/Slave, CCM Slave, DNP3 Master/Slave, and SPL
GE IC670MDL740
Product Overview: GE IC670MDL740 is a 16-channel discrete output module belonging to the Field Control Series of GE Fanuc. This module is designed to provide reliable and efficient control over various industrial devices such as relays, solenoids, and indicators.
GE IC670MDL640
Product Overview: The GE IC670MDL640 is a 16-point discrete input module belonging to the Field Control Series manufactured by GE Fanuc. This module is designed to provide a versatile solution for receiving digital signals from various input devices such as switches, buttons, and sensors.
GE IC670MDL240J
Technical Specifications Discrete Input Channels: 16 (sixteen) Input Voltage Range: 24 VDC (Note: Some sources indicate it may also operate with 120 VAC input signals, but for IC670MDL240J specifically, 24 VDC is mentioned) Input Current: 15 mA per channel Contact Resistance: < 1Ω Filtering Time: < 2 ms Common Mode Rejection Ratio (CMRR): > 60 dB Noise Immunity: > 10 V RMS Operating Temperature Range: -40°C to 70°C Power Supply Voltage: 24 VDC Dimensions: 90 mm x 30 mm x 25 mm
GE IC670GBI102D
Product Overview: GE IC670GBI102D is a control module designed and manufactured by General Electric (GE) for use in industrial automation and control systems. This module is known for its robust performance, reliability, and compatibility with various GE and third-party systems.